Connexion

[NEWS]Tutoriel pour passer une PS3 Retail (CEX) en Debug (DEX) : News - PS3-Infos

[NEWS]Tutoriel pour passer une PS3 Retail (CEX) en Debug (DEX)   

Les news du Hack PS3 postées sur PS3 Infos

[NEWS]Tutoriel pour passer une PS3 Retail (CEX) en Debug (DEX)

Messagepar Itachijiraya » Jeu 8 Sep 2011 23:34

imageZeryos a rendu disponible aujourd'hui le kit de conversion PS3 CEX to DEX Converter Kit (Retail to Debug), qui exige actuellement l'IDPS (PlayStation ID via le serveur de Sony dans le format de request_idps.txt) par le hackeur "You know who" afin de convertir une console PS3 Retail en Debug (Test)


Pour la petite histoire la méthode qui consiste à rendre une PS3 CEX en DEX a été leaké sur certains réseaux IRC qui révèlent que "dans un premier temps Mathieulh la donna à Durandal sans la permission du hacker RichDevX."

Voila un tweet (maintenant supprimé) de Squarepusher2.
"BTW Mathieulh I know you gave durandal that CEX-DEX ZIP, that it wasn't you that bundled that up, and you were not supposed to do so either".


Avec la sortie de ce kit de conversion (de PS3 CEX à PS3 DEX), d'autres développeurs peuvent commencer à l'examiner et déterminer la façon de générer le fichier request_idps.txt requis sans accès aux serveurs de Sony.

**ATTENTION** SI CE TUTORIEL N'EST PAS SUIVI A LA LETTRE IL Y A RISQUE DE BRICK, EN AUCUN CAS L'AUTEUR NI PS3 INFOS NE SERA TENU RESPONSABLE SI VOUS BRICKEZ VOTRE CONSOLE, VOUS CONNAISSEZ LES RISQUES.


DEX to CEX Converter By "You know who"

Requis:

1. Une Playstation 3 au firmware 3.55 ou inférieur.
2. UN dongle pour passer en Service mode.
3. Une clé USB.
4. Un cerveau.
5. L'auteur de cette "petite astuce".
6. Avoir votre PC connecté directement à votre PS3 en Ethernet avec l''IP 192.168.0.100, le masque de sous réseau 255.255.255.0.(Assurez-vous qu'aucun pare-feu ne soit en marche, ou correctement configurer, car cela peut empêcher votre console de se connecter au PC).



Procédure:

** PART 1 **

1. Set your console into service mode with any compatible dongle.

2. Put the content of the converter-console folder at the root of your usb pendrive.

3. Extract ObjectiveSuites-GetData on your PC.

4. Put the usb pendrive on the last usb port on the right of your console.

5. Run ObjectiveSuites.exe from ObjectiveSuites-GetData

6. You now have a few seconds to start your console, start it.

7. Objective Suite should display "PASS" and txt files will be created in the Temp dir. Once done, power off your console.

8. Get ALL these txt files from your temp directory and send them to the author (me) with informations about your playstation 3 model (FAT/SLIM, CECH* model)

** PART 2 **

9. You should recieve from the author (Yeah me again) a file called request_idps.txt

10. Extract ObjectiveSuites-SetIdps on your pc.

11. Put the request_idps.txt in your temp folder (MAKE EXTRA SURE IT'S THERE OR YOU WILL BRICK)

12. Run ObjectiveSuites.exe from the ObjectiveSuites-SetIdps directory.

13. Start the SAME CONSOLE YOU GOT THE TXT FILES FROM (If it's another console you WILL BRICK IT).

14. Wait until Objective suite displays "PASS" Then power off your console, at this point your console should be a Debug one.

** PART 3 **

15. You will now need to do a drive initialisation in order to use the bluray drive on your console. Put your usb pendrive on your pc, delete all the files you previously put in there, Put "Lv2Diag.self" from the "set up" directory at the root of your pendrive along with PS3UPDAT.PUP (that's 3.30 debug firmware)

16. Put the pendrive on the usb port on the most right of your console.

17. Power on the console, The screen will be black and the green led will stay lit, wait until it blinks and the console powers off, once it does the firmware will be installed.

18. Put the pendrive back on pc, delete the files you put in there previously, and copy the content of the "drivefix" folder to the root of the pendrive.

19. Put the pendrive at the usb port most on the right of your console and power it on.

20. The drive initialisation will then occur, wait a couple of seconds, then power off the console (you may have to unplug it from the AC)

21. Put the pendrive back onto the pc, delete the files you previously put in there, then copy the Lv2diag.self from the "finalize" folder.

22. Put the pendrive on the usb port on the most right of your console. Power it on. Your console will power on for a few seconds then power off.

CONGRATULATIONS YOU HAVE NOW COMPLETED ALL THE STEPS AND YOUR CONSOLE IS A FULLY FUNCTIONAL DEBUG BOX. YOU NOW JUST NEED TO POWER IT ON AND COMPLETE THE USUAL FIRST TIME SETUP PROCEDURE.


Image


télécharger Télécharger PS3 CEX to DEX Kit (Retail to Debug) (Mot de passe = ps3scene)

http://www.ps3news.com/ps3-hacks-jailbreak/ps3-cex-to-dex-kit-retail-to-debug-surfaces-requires-idps/Source : http://www.ps3news.com/ps3-hacks-jailbreak/ps3-cex-to-dex-kit-retail-to-debug-surfaces-requires-idps/
Avatar de l’utilisateur
Itachijiraya
Modérateur
 
Messages: 616
Inscription: Ven 3 Sep 2010 16:54

Retourner vers News

 


  • Articles en relation
    Réponses
    Vues
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 25 invités